Lennox LAPEV30/36GG, High Static Power Exhaust Fan with Variable Frequency Drive, 2 Hp, 731 - 932 RPM, 460 VAC
Cat # : 83M90
Model/Part # : LAPEV30/36GG
This product is used in several different models.
Product Overview
Lennox LAPEV30/36, High Static Power Exhaust Fan with Variable Frequency Drive
These blower assemblies are located in the cabinet that attaches to the rooftop unit horizontal return air section. When the rooftop unit provides a signal to operate, a contactor located in the power exhaust control box is energized, providing high voltage power to each motor. This allows the blower assemblies to exhaust air from the building through the return air duct work of the rooftop unit. On the PEV models a pressure differential is measured between outside air and return air and a signal is sent to VFD for change of motor speed.
- Constant volume high static power exhaust blower 100%, (3) 2 HP Motors
- Centrifugal-type power exhaust blowers
- Overload and sub-fuse protected
- Ball bearings
- Forward curved blades
- Blower wheel is statically and dynamically balanced
- Adjustable pulleys for speed adjustments
- Controlled by damper position.
NOTE − High Static Power Exhaust is field installed but must be ordered at the same time as the rooftop unit so the unit can be factory configured for this option.